10 Kid Feeder Holder
SKU: SKU5316
Presenting a brand new way to hold your 10 kid nipple feeder. Simple to use. Just slide your feeder into the holder and you are ready to feed those babies. The steady, cypress base is completely portable and can be cleaned with a hose. It's easy peasy.
$35.95
Multi Purpose 10 Kid Feeder with Holder
SKU: SKU5317
During kidding season, this holder works great as a portable 10 kid feeder holder. When kidding season is over, your holder becomes a water bucket, grain feeder, mineral feeder, or chopped hay feeder. Made of cypress and food grade plastic. Simple to clean with a hose. It's easy peasy!
$64.95
Market price: $75.90
save 14%
The Pritchard Multi-Kid Feeder
SKU: 2N-1
At last! A multi-kid feeder that uses Pritchard Teats. Designed especially for those little ones who initially prefer a Pritchard nipple to the larger bucket-unit nipple. When your goats get older, simply convert this feeder to a regular multi-kid feeder using the 2P Nipples. Complete instructions included.
$49.95
Market price: $59.95
save 17%
Multi-Kid Feeder
SKU: 2N
Enjoy the convenience of feeding a slew of kids at once. Simply rest the flat, blank side of the feeder against your legs white the kids nurse. No need to sacrifice the advantages of individual hand feeding just because you need a multi-kid feeder. No holder and welded tire rim needed to secure feeder. Square bucket fits snugly and securely against any flat surface (fence, pen, barn wall) or can be comfortably hand held. Tubeless gravity feeding means no tubes to wash, no special kid training and no bloating due to unwanted air in the stomach while feeding. Six specially-sized nipples designed for simple, easy, thorough cleaning. Leakproof bucket units enable kids to get every drop of milk. Eliminate the risk of deadly scours and e.coli that can result from improperly cleaned tube-type feeders and nipples. The complete multi-kid feeder includes: Sturdy 4 gallon square bucket with lid, 6 nipples, and 6 leak-proof nipple holders.
The 49D Fenceline Hanger sold separately can be used to secure the bucket to a number of different wire fences. ***HOLDS 4 GALLONS OF MILK***
The 49D Fenceline Hanger sold separately can be used to secure the bucket to a number of different wire fences. ***HOLDS 4 GALLONS OF MILK***
$44.95
Fenceline Hanger for Multi-Kid Feeder
SKU: 49D
This handy little holder secures the square kid feeder bucket onto a number of different wire fences including cattle panels. Can be positioned for kids of all sizes. Sturdy welded wire is designed to drop easily into place.
$3.95
Pritchard Nipple
SKU: 2A
they were first made in 1997. This nipple features a durable screw-on base that fits most soft drink bottles. The seamless, hollow cone-shape provides the perfect feeding rate, starting with newborns right up to weaning and the built-in leak-proof “flutter valve” allows air control to prevent nipple collapse. Simply slice the tip with a razor or scissors to create the appropriate opening size. Start at the very end of the tip to get a slow flow. Remember, you can always make the hole larger. Best of all, even the most enthusiastic kid cannot pull this nipple off the bottle. These are the REAL Pritchard Nipples, made in New Zealand.
$2.95
Replacement gasket for 2R Holder
SKU: 2R-1
Replacement gasket for 2R Nipple Holder used in both the 2N & 2N-1 Multi-kid feeders
$0.55
Replacement Bucket for 2N,2N-1, 2N-2 Feeders
SKU: 2S
Replacement bucket for the 2N and 2N-1 Multi-Kid feeders
$11.95
4-Bottle Rack with Nurser Bottles
SKU: 89S-2
Same fabulous bottles as the 89S, but you get a set of four bottles and a handy bottle rack so you can feed four goats at one time. A must for a busy barn.
$79.95
Ten Nipple Kid Feeder
SKU: 2DZ
Tube-type multi-kid feeder includes bucket with lid, ten tubes, ten nipples and a tube cleaning brush. Available in original grey nipples.
$49.95
One-Way Tube Valve
SKU: 2V
Give your kids a helping hand with these one-way tube valves. The small check valves help keep the milk up in the tube which makes it easier to train a kid to drink from the tube feeders. Works with all our 2D kid feeders.
$1.25
Grey Replacement Nipple
SKU: 2F
Nipple designed for the 2D Multi-Kid Feeder. Also, fits most standard pop bottles.
$1.95
Round Holder for 2D Feeders
SKU: 2J
Holder for 2D Feeders which must be welded or bolted into a tire rim for height and stability.
$15.95
Replacement Feeder Bucket for 2D Ten Kid Feeders
SKU: 2H
Replacement bucket and lid for 2D Ten Kid Nipple Feeders
$12.95
Replacement Tube Brush
SKU: 2G
For cleaning 2E replacement tubes used in the 10 nipple kid feeder.
$3.95
Cheese Making
